Technical specifications
Specifications: 1 '4', DN25 - DN100
Connection mode: clamp
Material: 304/316 l
Seal: standard EPDM and silicone, fluorine rubber can be used
Work style: automatically
Surface treatment: fine cars or polishing Ra 0.8 microns or less
Temperature range: - 10 ℃ to + 95 ℃
The maximum product pressure: 10 bar
Minimum pressure of products: vacuum
Jump pressure: 0.1 bar - 8 bar is optional
Operating principle
application
Designed for container, negative pressure when the outside air flows into the vessel pressure when the automatic exhaust valve.
The standard design
By the body, shaft, spring gland, etc.
Connection mode fast connection
The material
Product and material contact part 304 or 316 l sealing material
EPDM (EPDM)
The technical requirements
1, the exhaust pressure of 0.1 bar - 3 bar
2, 50 MMHG inspiratory pressure
