application

Pneumatic pressure and flow control

The standard design

The valve body, valve core and all parts are made of 316 l or 304 inside and outside the body sandblasting polishing, diaphragm is made of high quality rubber, the high temperature can reach 140 ℃

The working principle of

CPM - 2 constant pressure regulating valve is controlled by control the size of the pressure of compressed air to the position of the valve core, so as to achieve the required pressure and flow rate.

Technical parameters

Maximum production pressure: - 1000 kpa (10 bar)

Minimum production pressure: Okpa (10 bar) = atmosphere

Temperature range: 10 ℃ to + 95 ℃

Temperature range (PTFE/EPDM diaphragm) : - 10 ℃ to + 95 ℃ (higher) according to the requirement

Air pressure: 0.600 KPa (O to 6 bar)

Flow range Kv, fully open (p = 1 bar) : about 23 m about 2 m